Cookie Img
Back to top
+918802192464

    Product Showcase
    Home » Products » supreme pipes

    supreme pipes

    supreme pipes
    supreme pipes
    Product Code : 07
    Brand Name : supreme
    Product Description

    Handling instructions

    Pipes should be kept on an even surface while storing. They should be properly supported and should not be stacked for heights more than 1.5m for longer durations.

    While laying big pipelines provisions should be made for expansion joints, airvents and proper anchorage.

    Pipes of fittings should not be cleaned with solvent cement.

    Quality of solvent cement plays an important role and hence it is recommended to use good quality solvent cement only. For large diameter and higher class pipes (6 kgf/cm2 and above) always use heavy duty solvent cement,very old, hard semi-fluid solvent cement should not be used.

    Consumption of solvent cement

    Diameter of pipe (mm)

    20

    25

    32

    40

    50

    63

    75

    90

    110

    140

    160

    180

    200

    225

    250

    280

    315

    355

    400

    450

    Appr. No of joints which can be made per liter of solvnet cement

    324

    270

    225

    180

    130

    125

    103

    79

    54

    36

    27

    25

    15

    12

    9

    7

    5

    3

    2

    2

    Joining instructions

    Cut the pipe as square as possible, please ensure that fitment of pipe with socket of fitting is correct.

    Total length of insertion of socket shall be marked on pipe (for most of the cases the pipe inserted should be up to the marked line and in no case shall be less than 2/3rd of the pipe end up to the marked line)

    The pipe and the socket should be clean and dry. Dust, oil, water, grease etc. should be wiped out with dry cloth or cleaner with from the surfaces to be coated with solvent cement.

    Roughen the outside of the pipe and the inside of the socket using sand paper of piece of hacksaw blade up to the entry mark. Stir adhesive i.e. solvent cement throughly.

    Apply a thick coat of solvent cement using a flat clean brush evenly on the sides of the socket mouth for full length of insertion and then on outside of the pipe end up to the marked line.

    After application of solvent cement, insert the pipe with in one minute in to the socket. Hold the joint for few seconds and ensure that pipe does not come out of the fitting. Wipe off extra cement. Let it dry. With in 24 hours, your supreme rigid PVC pipes are ready for use.

    In case of big pipeline projects, it is recommended to refer our installation guide.


    JAINCO PIPES PVT. LTD.

    Contact Us

    ( *represents compulsory fields )

    Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



    Registered Office

    Best Sky Tower Netaji Subhash Palace Pitampura Delhi
    Phone No. - 011- 27351555