Cookie Img
Back to top
Home » Products » Elastomeric Sealing Ring

Elastomeric Sealing Ring

Elastomeric Sealing Ring
Elastomeric Sealing Ring
Product Code : 08
Brand Name : supreme
Product Description

Ringtight Advantages

  • These pipes are specially designed and suitable to overcome difficulties experienced while joining solvent type pipes in higher diameter and offers following advantages.
  • As elastomeric sealing rings are used, requirements and precautions associated with quality and quantity of solvent cement are avoided.
  • Unlike solvent type joings, curing, periods are not required and hence piepelines can be tested and brought in use immediately after jointing.
  • Pipe laying and jointing is very easy, quicker and more reliable. Pipes up to 140mm size can be jointed by hand force but large diameter pipes requires a jack.
  • Joints are stable, water tight and can resist loads from horizontal and vertical attractive forces.
  • Joints can accommodate angular deflection up to 2” and axial displacement resulting from thermal expansion and contraction, which eliminates the need of expansion joint as required in solvent type joints.
  • Joints can be made in any climatic condition.

About Elastomeric Sealing Ring

  • Unique design of sealing ring supplied with the pipe is made from high quality EPDM rubber to meet the practical requirements of sites, which add major contribution to installation efficiency. This seal can be safely and easily fitted in wet, cold and muddy conditions These sealing rings offer following advantages
  • Very low assembly force is required for joint
  • It has big operational life (As per manufacturer minimum life is about 50 years)
  • These rings give grater reliability and joint lightness and can withstand pressures beyond that of specified testing pressure of the pipe.
  • Specially suitable for under ground application.
  • It is resistant to salt water, organic vegetable oils, dilute acids, and alkalies normally found in waster water. It is also resistant to ozone ultra violet radiation, bacteria, fungus and termites. In short supreme ringtight pipes are designed to give long term satisfaction to the customer.

Jointing Instructions

  • Clean the inside of Socket. Remove all traces of mud, dirt, grease, grave and clean elastomeric sealing ring.
  • From the ring in to a heart shape by pinching a portion of ring from inside. Insert in to the socket and release to seat in to the groove.
  • Factory supplied pipes are provided with a 15” chamfer. Mark the insertion depth on spigot portion of pipe. Clean and apply lubricant to insertion depth before pushing in to the socket.
  • If pipe need to be cut, it should be cut perpendicular to the axis of the pipe. Then it should be chamfered properly.
  • Align the socket and spigot correctly in the horizontal and vertical planes (before insertion, ensure that no sand or dirt adheres to the lubricated surface of the pipe). Care should be taken that the spigot and is inserted in the socket at the correct angle.
  • Push the spigot in to the socket until it reaches the depth of entry mark, do not over insert. This must be done manually. Use a steel crow bar if necessary. Protect the pipe with wooden block. Insertion of spigot and inside the socket should be at the correct angle.
  • In case of large diameter pipes, if crow bar does not give sufficient leverage, use of a jointing jack may be helpful.

 

 

 

 


JAINCO PIPES PVT. LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Registered Office

Best Sky Tower Netaji Subhash Palace Pitampura Delhi
Phone No. - 011- 27351555
Opp Petrol Pump, Novelty Road, Karnal - 132001, Haryana, India
   Call Me Free Send SMS Send Inquiry
Key Personnel
Mr. Surinder Jain (M.D)
Mr. Ankit Jain (Director)
Mr. Mayank Jain (Director)
Delhi Office : 900/9Th Floor Best Sky Tower F-5, Netaji Subhash Place PitamPura Delhi-35
Trust Stamp
Product Showcase